FAQs

I betting it is something that comes up occasionally but I forgot to include in the DVD. The pin is either not in all the way binding on the left frame wall or is too far in and binding on the right frame wall. When you drive the lever to bolt pin in make sure it’s all the way in. Then if it is still bound up tap it back just slightly until it allows the bolt to move, and; if it drags on the inside, this is because it is not centered. It’s an easy fix once you get it to move. Just open the bolt about half way and then give it a whack on the sides with your hammer handle. This should help center that pin so it doesn’t drag.